86520-2D500 Front Bumper Inner Lining(Bubble) for Hyundai Elantra ’04

Front Bumper Inner Lining(Bubble) for Hyundai Elantra ’04: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Vehicle-Side Evidence

This front bumper inner lining(bubble) is associated with Hyundai Elantra ’04. The numbers 86520-2D500 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The stock controller should capture overall corner curvature, align bracket and bolt-hole spacing, and verify upper edge alignment below the lamps before the delivery plan is confirmed. This route applies to the front bumper inner lining(bubble) shown for Hyundai Elantra ’04.

If images accompany the enquiry, include a removed-part overview, an installation-opening picture, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with removed-part overview to capture overall corner curvature. A second image should show lamp or grille openings from installation-opening picture. Before the delivery plan is confirmed, align upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’04 vehicle record.

The installation team should measure side-retainer engagement from a corner-profile view, then photograph side-retainer engagement before the commercial request is submitted. A collision-repair specialist should trace lamp or grille openings from a fastener detail, then record side-retainer engagement before the packing plan is prepared. The importing distributor should mark lamp or grille openings from a straight-on view, then mark overall corner curvature before the vehicle is dismantled. The maintenance supervisor should record side-retainer engagement from a corner-profile view, then inspect bracket and bolt-hole spacing before the replacement is test-positioned.

Repair Planning Notes

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 145 × 33 × 47.5CM / 10PCS; reconfirm current packing when freight is quoted.

Supply Enquiry Details

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

The stated vehicle is Hyundai Elantra ’04. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How is the pictured version best verified?

Fitment evidence should show overall corner curvature, lamp or grille openings and the position where the component will be installed.

How should a wholesale request be submitted?

A complete sourcing request names the quantity, delivery market and the comparison information used. The supplier can then review the product version, carton requirements and delivery options.