86350-H6010 Grille (Chromed Strip) for Hyundai Solaris ’16 / Accent ’17

Grille (Chromed Strip) for Hyundai Solaris ’16 / Accent ’17: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the grille inspection group.

Product Specifications

Installation Planning

This grille (chromed strip) is associated with Hyundai Solaris ’16 / Accent ’17. Write 86350-H6010 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Upper tab positions
• Lower clip arrangement
• Mesh or slat pattern
• Clearance beside the lamps
• Outer perimeter shape

The installation team should capture upper tab positions, compare lower clip arrangement, and measure outer perimeter shape before the quotation is approved. This route applies to the grille (chromed strip) shown for Hyundai Solaris ’16 / Accent ’17.

If images accompany the enquiry, include an underside image, a chassis-plate image, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with underside image to capture upper tab positions. A second image should show mesh or slat pattern from chassis-plate image. Before the quotation is approved, compare outer perimeter shape and note any difference from the removed component. Keep these observations with the Hyundai Solaris ’16 / Accent ’17 vehicle record.

The procurement contact should capture mesh or slat pattern from an original-label photograph, then trace lower clip arrangement before the quotation is approved. A vehicle inspector should confirm outer perimeter shape from a vehicle-side photograph, then inspect outer perimeter shape before the repair schedule is finalized. The stock controller should inspect clearance beside the lamps from a chassis-plate image, then compare lower clip arrangement before the carton is allocated. The receiving technician should review upper tab positions from a rear mounting view, then verify clearance beside the lamps before the delivery plan is confirmed.

Physical Fitment Points

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Fitment Evidence

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What vehicle information should be checked first?

Application information points to Hyundai Solaris ’16 / Accent ’17. A workshop should still compare the removed item and mounting location before ordering.

How can an incorrect order be avoided?

Ask the workshop to inspect upper tab positions together with mesh or slat pattern. VIN or chassis information can clarify market-specific differences.

How should a wholesale request be submitted?

Send the order volume and destination together with VIN or chassis information where available. This information helps separate technical confirmation from the later shipping calculation.