92101-1R730 / 92102-1R730 Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16

Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Identification Summary

This headlight assembly is associated with Hyundai Accent / Accent ’14 / Solaris ’16. Write 92101-1R730 / 92102-1R730 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The parts coordinator should trace left or right installation position, evaluate clearance beside bumper and grille, and inspect mounting tabs around the housing before the purchase order is issued. This route applies to the headlight assembly shown for Hyundai Accent / Accent ’14 / Solaris ’16.

If images accompany the enquiry, include a side-profile photograph, an adjacent-panel image, and an underside image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with side-profile photograph to trace left or right installation position. A second image should show lens profile and outer edge from adjacent-panel image. Before the purchase order is issued, evaluate mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Hyundai Accent / Accent ’14 / Solaris ’16 vehicle record.

The parts coordinator should note electrical plug and pin layout from an adjacent-panel image, then document clearance beside bumper and grille before the shipment is booked. A workshop estimator should capture mounting tabs around the housing from a fastener detail, then review left or right installation position before the delivery plan is confirmed. A workshop estimator should review left or right installation position from a fastener detail, then evaluate left or right installation position before the delivery plan is confirmed. The receiving technician should review electrical plug and pin layout from a vehicle-side photograph, then cross-check lens profile and outer edge before the packing plan is prepared.

Application Review

Retain the removed part until the replacement has been visually compared and test-positioned. Recorded packing is 76 × 71 × 50 × 50CM / 6PCS; reconfirm current packing when freight is quoted.

Reference Check

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This headlight assembly appears under Hyundai Accent / Accent ’14 / Solaris ’16. Review the exact vehicle version rather than relying on the model name by itself.

What should be compared with the removed component?

Use the old component to check left or right installation position and lens profile and outer edge. Also state the installation side or position in the enquiry.

What should be included in a B2B enquiry?

Send the order volume and destination together with VIN or chassis information where available. State the required side or installation position where that detail applies.