Front Fender Liner for Jeep Grand Commander K8 2018-2021
- Two circular fixing areas with central holes sit above the large open cutout.
- A curved upper flange carries additional holes, while the lower edges follow an uneven contour.
- Check the complete inner-wheel-arch shape and required side, not just the visible outer arch curve.
Front Liner Shape and Fixing Areas
The pictured front fender liner has a large central cutout beneath two circular fixing areas. Its upper edge follows a curved flange with small holes and notches. The lower outline is asymmetric, with different edge shapes on either side of the opening.
These features are useful when the old liner is damaged around its edges. Compare the remaining holes and the height of the upper flange, then check the full lower contour against the intended mounting position. The photo alone does not identify the material or establish which side is pictured.
Side-Specific References
The application is Jeep Grand Commander K8 2018-2021. OE references are 53367535 LH / 53357536 RH. Use the complete number for the required side and compare it with the original part before ordering.
Is this the visible outer wheel arch trim?
No. It is the front fender liner, a shaped inner panel. The outer decorative arch trim is a different component.
Does the image establish a fixing kit?
It shows holes and shaped fixing areas, not a confirmed fastener package. Ask which separate fixing pieces, if any, are included.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
