Rear Bumper Lower for KIA K2 ’16 / K5 ’11-’13
- Use a vehicle-side image to confirm Rear Bumper Lower and panel clearance
- Request current rear bumper lower carton dimensions and pieces per carton
- Include Rear Bumper Lower in the technical approval request
- Confirm the KIA K2 '16 / K5 '11-'13 rear bumper lower front, rear, left or right position where applicable
- Resolve any panel clearance difference affecting the Rear Bumper Lower version
- Confirm bracket profile, then verify the Rear Bumper Lower outer edge
- Use panel clearance to distinguish the KIA K2 '16 / K5 '11-'13 rear bumper lower version
- Compare bracket profile while reviewing the Rear Bumper Lower configuration
- Check whether Rear Bumper Lower matches the photographed KIA K2 '16 / K5 '11-'13 construction
The pictured component is a rear bumper lower associated with KIA K2 '16 / K5 '11-'13. Final choice depends on a physical and car-side comparison.
KIA Product Data
| Item | Rear Bumper Lower |
|---|---|
| OEM replacement reference | Not confirmed in source data |
| Car designation | KIA K2 '16 / K5 '11-'13 |
| Inspection family | Bumper and Trim |
| Configuration checkpoint | bracket profile |
| Car-side checkpoint | panel clearance |
| Supply format | B2B replacement-parts enquiry |
Model and Reference Confirmation
Without a confirmed number, document panel clearance and the complete reverse side.
Check that the vehicle is identified as KIA K2 '16 / K5 '11-'13 and image the removed installation area.
Item Recognition Guide
Measure bracket profile using the original installation point. Measure locating holes and the rear bumper lower outer shape for quotation preparation. Use panel clearance to separate versions that may appear similar in a front-view image.
- bracket profile
- locating holes
- panel clearance
Installation and Position Inspect
Begin with a dry fit of the rear bumper lower and use only the primary locators. Review the attachment interface and surrounding gap before final tightening. Resolve any discrepancy in panel clearance before permanent assembly.
B2B Enquiry Data
Prepare the enquiry with fitment details, side, quantity and delivery country. Add a automobile-side photograph and a close view of locating holes. Request updated packing data with the stock quotation.
Buyer Comparison Checklist
- Verify panel clearance at the KIA K2 '16 / K5 '11-'13 installation opening.
- Use fixing-point close-ups to support rear bumper lower decision.
- Keep car production information with the Rear Bumper Lower enquiry.
- Use the Rear Bumper Lower reference together with a reverse-side picture.
- Do not force the Rear Bumper Lower configuration into a mismatched opening.
- Verify that bracket profile aligns naturally prior to tightening fasteners.
- Retain the original assembly until locating holes is verified.
- Review the rear bumper lower finish and visible edge condition.
Frequently Asked Questions
Which vehicle is associated with this component?
The listed application is KIA K2 '16 / K5 '11-'13. Verify it against the vehicle and existing part.
Which data need a physical comparison?
Compare bracket profile, locating holes and panel clearance ahead of selection.
How should an availability request be prepared?
Send the application, reference when available, needed quantity, destination and comparison photographs.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
