86511-4X500 Front Bumper for KIA K2 / K2 ’14 / K2 ’16
- Photograph 86511-4X500 from front and reverse directions
- Ask the workshop to compare 86511-4X500 without modifying brackets
- Do not finalize KIA K2 / K2 '14 / K2 '16 front bumper fitment until mounting tabs and installed position agree
- Confirm the KIA K2 / K2 '14 / K2 '16 front bumper front, rear, left or right position where applicable
- Do a loose trial placement before releasing the 86511-4X500 order
- Check whether 86511-4X500 matches the photographed KIA K2 / K2 '14 / K2 '16 construction
- Review the KIA K2 / K2 '14 / K2 '16 opening before approving 86511-4X500
- State quantity and destination for the KIA K2 / K2 '14 / K2 '16 B2B enquiry
- Begin 86511-4X500 selection with a direct mounting-interface comparison
This front bumper is listed for KIA K2 / K2 '14 / K2 '16. Use the catalogue information together with photos and the existing automobile item.
KIA Product Data
| Item | Front Bumper |
|---|---|
| OEM replacement reference | 86511-4X500 |
| Car designation | KIA K2 / K2 '14 / K2 '16 |
| Inspection family | Bumper and Trim |
| Design checkpoint | mounting tabs |
| Car-side checkpoint | installed position |
| Supply format | B2B replacement-parts enquiry |
KIA Fitment Assess
Quote 86511-4X500 in the enquiry and also document installed position.
Verify that the automobile is identified as KIA K2 / K2 '14 / K2 '16 and photograph the vehicle-side installation area.
Physical Identification
Inspect fastener spacing and the front bumper outer shape for installation planning. Use installed position to separate versions that may appear similar in a front-view image. Verify mounting tabs during a dry fit.
- fixing tabs
- fastener spacing
- installed position
Installation Preparation
Place the front bumper loosely in position prior to engaging every fastener. Review the attachment interface and surrounding gap ahead of final tightening. Request another variant when the mounting geometry does not agree.
Commercial Order Information
Send the vehicle model association, required position, order volume and destination. Add a car-side photo and a close view of fastener spacing. Request updated packing data with the stock quotation.
Buyer Comparison Checklist
- Examine the front bumper finish and visible edge condition.
- Use fixing-point close-ups to support front bumper selection.
- Request another view if installed position is not visible.
- Document the intended installation side when it applies.
- Validate installed position at the KIA K2 / K2 '14 / K2 '16 installation opening.
- Approve KIA K2 / K2 '14 / K2 '16 only after a physical comparison.
- Use the 86511-4X500 reference together with a reverse-side picture.
- Verify brackets and guides for damage prior to installation.
Frequently Asked Questions
Which car is associated with this component?
The listed application is KIA K2 / K2 '14 / K2 '16. Verify it against the car and existing part.
What distinguishes the intended configuration?
Review fixing tabs, fastener spacing and installed position ahead of decision.
What belongs in a B2B enquiry?
Provide the fitment, reference when available, selected quantity, destination and comparison photos.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
