Front Bumper Version A for Daewoo N300 / N400 / Cerato ’05

Front Bumper Version A for Daewoo N300 / N400 / Cerato ’05: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This front bumper version a is associated with Daewoo N300 / N400 / Cerato ’05. The missing OEM reference is preserved deliberately so an internal code is not presented as an original number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Supply Enquiry Details

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The stock controller should review bracket and bolt-hole spacing, note lamp or grille openings, and align overall corner curvature before the commercial request is submitted. This route applies to the front bumper version a shown for Daewoo N300 / N400 / Cerato ’05.

If images accompany the enquiry, include a vehicle-side photograph, an installation-opening picture, and an adjacent-panel image. Label the evidence with the vehicle designation Daewoo N300 / N400 / Cerato ’05 so the workshop and purchasing team review one configuration.

The stock controller can begin with vehicle-side photograph to review bracket and bolt-hole spacing. A second image should show side-retainer engagement from installation-opening picture. Before the commercial request is submitted, note overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo N300 / N400 / Cerato ’05 vehicle record.

A workshop estimator should compare lamp or grille openings from a rear mounting view, then review side-retainer engagement before the carton is allocated. The service adviser should mark upper edge alignment below the lamps from a chassis-plate image, then compare lamp or grille openings before the shipment is booked. The receiving technician should inspect upper edge alignment below the lamps from an underside image, then evaluate overall corner curvature before the fitment decision is signed off. The repair planner should inspect lamp or grille openings from a connector close-up, then document side-retainer engagement before the packing plan is prepared.

Commercial Request Details

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Technical Comparison Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which vehicle is this component listed for?

The stated vehicle is Daewoo N300 / N400 / Cerato ’05. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How is the pictured version best verified?

Fitment evidence should show bracket and bolt-hole spacing, side-retainer engagement and the position where the component will be installed.

How can a trade buyer request pricing?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Include clear original-part photographs when the exact configuration needs further review.