96623441 Front Bumper Grille – Inner Lamp for Daewoo Captiva ’07 / Captiva ’12

Front Bumper Grille – Inner Lamp for Daewoo Captiva ’07 / Captiva ’12: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Physical Fitment Points

This front bumper grille – inner lamp is associated with Daewoo Captiva ’07 / Captiva ’12. For purchasing documents, quote 96623441 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

A vehicle inspector should record left or right installation position, compare clearance beside bumper and grille, and mark mounting tabs around the housing before the vehicle is dismantled. This route applies to the front bumper grille – inner lamp shown for Daewoo Captiva ’07 / Captiva ’12.

If images accompany the enquiry, include an adjacent-panel image, a side-profile photograph, and an underside image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with adjacent-panel image to record left or right installation position. A second image should show lens profile and outer edge from side-profile photograph. Before the vehicle is dismantled, compare mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Captiva ’07 / Captiva ’12 vehicle record.

The repair planner should note mounting tabs around the housing from a removed-part overview, then inspect mounting tabs around the housing before the packing plan is prepared. The repair planner should assess mounting tabs around the housing from an original-label photograph, then measure electrical plug and pin layout before the replacement is test-positioned. The importing distributor should evaluate electrical plug and pin layout from an installation-opening picture, then confirm lens profile and outer edge before the stock request is released. A workshop estimator should confirm mounting tabs around the housing from a connector close-up, then inspect electrical plug and pin layout before the shipment is booked.

Replacement Selection Guide

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Commercial Request Details

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What model is associated with this replacement part?

This page associates the front bumper grille – inner lamp with Daewoo Captiva ’07 / Captiva ’12. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

Fitment evidence should show left or right installation position, lens profile and outer edge and the position where the component will be installed.

Which details help prepare shipping terms?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. State the required side or installation position where that detail applies.