Tail Light Assembly for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii

Tail Light Assembly for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Component Matching Record

This tail light assembly is associated with Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii. Ask the workshop for VIN, mounting-area images and the old component when no OEM reference is available. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle Confirmation

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A vehicle inspector should confirm mounting tabs around the housing, mark left or right installation position, and trace electrical plug and pin layout before the installation begins. This route applies to the tail light assembly shown for Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii.

If images accompany the enquiry, include an original-label photograph, a fixing-point close-up, and a straight-on view. Label the evidence with the vehicle designation Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with original-label photograph to confirm mounting tabs around the housing. A second image should show clearance beside bumper and grille from fixing-point close-up. Before the installation begins, mark electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii vehicle record.

A body-shop buyer should trace clearance beside bumper and grille from a fastener detail, then mark mounting tabs around the housing before the commercial request is submitted. A body-shop buyer should align electrical plug and pin layout from a removed-part overview, then assess mounting tabs around the housing before the packing plan is prepared. The stock controller should inspect lens profile and outer edge from a connector close-up, then evaluate lens profile and outer edge before the purchase order is issued. The installation team should review clearance beside bumper and grille from a removed-part overview, then evaluate electrical plug and pin layout before the purchase order is issued.

Inspection Route

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which vehicle is this component listed for?

The associated model designation is Daewoo Nexia ’08 / Cobalt ‘2013 / Lanos I / Ii. Confirm the body or electrical configuration relevant to this tail light assembly.

How should fitment be checked before ordering?

Check mounting tabs around the housing, confirm clearance beside bumper and grille, and retain the removed part until the replacement has been compared side by side.

How can a trade buyer request pricing?

For a trade enquiry, include required units, delivery location and photographs of the original component. Keep each requested product on a separate line when several parts share one shipment.