Packed Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Packed Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This packed front bumper is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. The missing OEM reference is preserved deliberately so an internal code is not presented as an original number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The stock controller should mark side-retainer engagement, evaluate upper edge alignment below the lamps, and trace lamp or grille openings before the packing plan is prepared. This route applies to the packed front bumper shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include an underside image, a full component outline, and a fixing-point close-up. Label the evidence with the vehicle designation Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti so the workshop and purchasing team review one configuration.

The stock controller can begin with underside image to mark side-retainer engagement. A second image should show overall corner curvature from full component outline. Before the packing plan is prepared, evaluate lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

The maintenance supervisor should measure bracket and bolt-hole spacing from a full component outline, then capture overall corner curvature before the packing plan is prepared. The installation team should photograph lamp or grille openings from a lower-retainer view, then record lamp or grille openings before the packing plan is prepared. The importing distributor should review lamp or grille openings from an original-label photograph, then evaluate overall corner curvature before the repair schedule is finalized. A collision-repair specialist should confirm overall corner curvature from an original-label photograph, then cross-check side-retainer engagement before the repair schedule is finalized.

Workshop Comparison

Keep protective wrapping in place where possible until the item has passed the initial comparison. Recorded packing is 200 × 30 × 28CM / 5PCS; reconfirm current packing when freight is quoted.

Procurement Checklist

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What is the listed vehicle application?

This packed front bumper is listed for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Photograph side-retainer engagement and the mounting area around overall corner curvature. Combine those images with vehicle identification data for review.

What should a distributor send for a quotation?

A complete sourcing request names the quantity, delivery market and the comparison information used. Packing and freight can be discussed after the component version has been identified.