Outer Tail Light Assembly for Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20

Outer Tail Light Assembly for Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Application Review

This outer tail light assembly is associated with Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20. Without an OEM marking, compare the complete outline and installation area rather than guessing a number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille

The stock controller should review lens profile and outer edge, confirm electrical plug and pin layout, and cross-check clearance beside bumper and grille before the packing plan is prepared. This route applies to the outer tail light assembly shown for Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20.

If images accompany the enquiry, include a corner-profile view, an adjacent-panel image, and a connector close-up. Label the evidence with the vehicle designation Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20 so the workshop and purchasing team review one configuration.

The stock controller can begin with corner-profile view to review lens profile and outer edge. A second image should show mounting tabs around the housing from adjacent-panel image. Before the packing plan is prepared, confirm clearance beside bumper and grille and note any difference from the removed component. Keep these observations with the Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20 vehicle record.

The repair planner should verify lens profile and outer edge from a chassis-plate image, then confirm lens profile and outer edge before the commercial request is submitted. The installation team should compare mounting tabs around the housing from an installation-opening picture, then measure lens profile and outer edge before the purchase order is issued. The receiving technician should cross-check clearance beside bumper and grille from a side-profile photograph, then review lens profile and outer edge before the repair schedule is finalized. The stock controller should record lens profile and outer edge from a full component outline, then note left or right installation position before the repair schedule is finalized.

Identification Summary

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Reference Check

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What vehicle information should be checked first?

This outer tail light assembly is listed for Hyundai Ix25 / Creta / Ix25 / Creta’18 / Ix25 / Creta’20. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

The practical checks are lens profile and outer edge, mounting tabs around the housing and the surrounding clearance. Avoid choosing the item from the model name alone.

What information helps confirm availability?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Providing the vehicle record at the start reduces follow-up questions during quotation.