LK7S71-17B968-AA 07 Lower Grille Of Front Bumper for FORD Mondeo / Mondeo Zhisheng
- State quantity and destination for the FORD Mondeo / Mondeo Zhisheng B2B enquiry
- Review the FORD Mondeo / Mondeo Zhisheng opening before approving LK7S71-17B968-AA
- Keep LK7S71-17B968-AA with the vehicle identification photograph
- Use a vehicle-side image to confirm LK7S71-17B968-AA and vehicle aperture
- Include LK7S71-17B968-AA in the technical approval request
- Record surface finish when checking the FORD Mondeo / Mondeo Zhisheng LK7S71-17B968-AA option
- Compare outer contour while reviewing the LK7S71-17B968-AA configuration
- Inspect surface finish before preparing a quotation for LK7S71-17B968-AA
- Supply clear fixing-point evidence for the LK7S71-17B968-AA enquiry
The pictured item is a 07 lower grille of front bumper associated with FORD Mondeo / Mondeo Zhisheng. Final selection depends on a physical and vehicle-side comparison.
FORD Product Data
| Part | 07 Lower Grille Of Front Bumper |
|---|---|
| OEM replacement reference | LK7S71-17B968-AA |
| Car designation | FORD Mondeo / Mondeo Zhisheng |
| Inspection family | Bumper and Trim |
| Configuration checkpoint | outer contour |
| Car-side checkpoint | car aperture |
| Supply format | B2B replacement-parts enquiry |
FORD Fitment Inspect
Use LK7S71-17B968-AA as the written cross-reference, then validate outer contour on the actual item.
Use FORD Mondeo / Mondeo Zhisheng as the catalogue vehicle designation while treating the removed piece as the final comparison sample.
Part Recognition Guide
Use car aperture to separate versions that may appear similar in a front-view image. Inspect outer contour ahead of ordering. Document surface finish and the 07 lower grille of front bumper outer shape for market-variant checking.
- outer contour
- surface finish
- car aperture
Installation Preparation
Present the 07 lower grille of front bumper to the opening without forcing clips or brackets. Validate even alignment and clearance around the adjacent panels. Stop if outer contour differs from the removed part.
B2B Enquiry Information
Send the vehicle vehicle designation, needed position, order volume and destination. Add a car-side image and a close view of surface finish. Request updated packing data with the stock quotation.
Buyer Comparison Checklist
- Photo surface finish from a direction showing the complete 07 lower grille of front bumper interface.
- Verify that outer contour aligns naturally prior to tightening fasteners.
- Check automobile aperture at the FORD Mondeo / Mondeo Zhisheng installation opening.
- Approve FORD Mondeo / Mondeo Zhisheng only after a physical comparison.
- Check brackets and guides for damage prior to installation.
- Supply quantity and receiving country in the commercial request.
- Do not force the LK7S71-17B968-AA variant into a mismatched opening.
- Use the LK7S71-17B968-AA reference together with a reverse-side image.
Frequently Asked Questions
What FORD application is recorded?
The listed fitment is FORD Mondeo / Mondeo Zhisheng. Verify it against the car and existing part.
How should the pictured configuration be verified?
Match outer contour, surface finish and vehicle aperture before choice.
What belongs in a B2B enquiry?
Include the vehicle designation, reference when available, required quantity, destination and comparison views.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
