Lining of Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra

Lining of Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This lining of front bumper is associated with Daewoo Nubira / Lacetti ’03 / Optra. Leave the reference-number field empty and use model, location, fasteners and visible shape for verification. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The service adviser should note lamp or grille openings, capture side-retainer engagement, and compare bracket and bolt-hole spacing before the installation begins. This route applies to the lining of front bumper shown for Daewoo Nubira / Lacetti ’03 / Optra.

If images accompany the enquiry, include a rear mounting view, an upper-edge image, and a corner-profile view. Label the evidence with the vehicle designation Daewoo Nubira / Lacetti ’03 / Optra so the workshop and purchasing team review one configuration.

The service adviser can begin with rear mounting view to note lamp or grille openings. A second image should show upper edge alignment below the lamps from upper-edge image. Before the installation begins, capture bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra vehicle record.

The repair planner should assess overall corner curvature from a fixing-point close-up, then document bracket and bolt-hole spacing before the fitment decision is signed off. The stock controller should confirm upper edge alignment below the lamps from a fastener detail, then confirm side-retainer engagement before the installation begins. A vehicle inspector should document bracket and bolt-hole spacing from a vehicle-side photograph, then note side-retainer engagement before the quotation is approved. The stock controller should record overall corner curvature from a vehicle-side photograph, then document bracket and bolt-hole spacing before the repair schedule is finalized.

Purchase Preparation

Keep protective wrapping in place where possible until the item has passed the initial comparison. Recorded packing is 132 × 50 × 38 × CM / 10PCS; reconfirm current packing when freight is quoted.

Vehicle Confirmation

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What model is associated with this replacement part?

This lining of front bumper is listed for Daewoo Nubira / Lacetti ’03 / Optra. Use that designation as a starting point and verify the vehicle configuration before ordering.

How should fitment be checked before ordering?

Ask the workshop to inspect lamp or grille openings together with upper edge alignment below the lamps. VIN or chassis information can clarify market-specific differences.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Packing and freight can be discussed after the component version has been identified.