Headlight Assembly Version B for Daewoo Trax ‘2017 / Ssangyong / N300

Headlight Assembly Version B for Daewoo Trax ‘2017 / Ssangyong / N300: The following information supports a structured pre-order check for trade buyers. The component belongs to the lighting inspection group.

Product Specifications

Repair Planning Notes

This headlight assembly version b is associated with Daewoo Trax ‘2017 / Ssangyong / N300. Fitment review should begin with the vehicle and continue with holes, clips and surrounding clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The installation team should measure mounting tabs around the housing, capture left or right installation position, and mark electrical plug and pin layout before the carton is allocated. This route applies to the headlight assembly version b shown for Daewoo Trax ‘2017 / Ssangyong / N300.

If images accompany the enquiry, include a removed-part overview, a straight-on view, and an original-label photograph. Label the evidence with the vehicle designation Daewoo Trax ‘2017 / Ssangyong / N300 so the workshop and purchasing team review one configuration.

The installation team can begin with removed-part overview to measure mounting tabs around the housing. A second image should show clearance beside bumper and grille from straight-on view. Before the carton is allocated, capture electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Trax ‘2017 / Ssangyong / N300 vehicle record.

The service adviser should measure left or right installation position from a fixing-point close-up, then evaluate mounting tabs around the housing before the quotation is approved. The installation team should cross-check clearance beside bumper and grille from a removed-part overview, then trace electrical plug and pin layout before the fitment decision is signed off. The installation team should measure electrical plug and pin layout from a straight-on view, then evaluate electrical plug and pin layout before the delivery plan is confirmed. The maintenance supervisor should capture electrical plug and pin layout from a vehicle-side photograph, then verify lens profile and outer edge before the replacement is test-positioned.

Replacement Selection Guide

Arrange a dry comparison before final fastening, and stop if holes or clips need force to line up. No packing entry is published here; request current carton and quantity information with the quotation.

Identification Summary

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What model is associated with this replacement part?

The listing covers Daewoo Trax ‘2017 / Ssangyong / N300. Because configurations may vary, check the actual installation area before approving the headlight assembly version b.

How can an incorrect order be avoided?

Review mounting tabs around the housing first, then inspect clearance beside bumper and grille on the vehicle. Clear photographs help the supplier assess the required version.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. The supplier can then review the product version, carton requirements and delivery options.