Grille Version B for Daewoo N300 / N400 / Cerato ’05

Grille Version B for Daewoo N300 / N400 / Cerato ’05: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the grille version b inspection group.

Product Specifications

Supply Enquiry Details

This grille version b is associated with Daewoo N300 / N400 / Cerato ’05. This entry carries no OEM number, making physical comparison especially important before ordering. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Mesh or slat pattern
• Clearance beside the lamps
• Outer perimeter shape
• Upper tab positions
• Lower clip arrangement

The service adviser should capture mesh or slat pattern, trace clearance beside the lamps, and align lower clip arrangement before the replacement is test-positioned. This route applies to the grille version b shown for Daewoo N300 / N400 / Cerato ’05.

If images accompany the enquiry, include an original-label photograph, a fixing-point close-up, and a vehicle-side photograph. Label the evidence with the vehicle designation Daewoo N300 / N400 / Cerato ’05 so the workshop and purchasing team review one configuration.

The service adviser can begin with original-label photograph to capture mesh or slat pattern. A second image should show outer perimeter shape from fixing-point close-up. Before the replacement is test-positioned, trace lower clip arrangement and note any difference from the removed component. Keep these observations with the Daewoo N300 / N400 / Cerato ’05 vehicle record.

A vehicle inspector should mark outer perimeter shape from an adjacent-panel image, then cross-check outer perimeter shape before the replacement is test-positioned. A workshop estimator should inspect upper tab positions from a full component outline, then review outer perimeter shape before the fitment decision is signed off. The stock controller should photograph lower clip arrangement from a connector close-up, then inspect lower clip arrangement before the replacement is test-positioned. The service adviser should compare outer perimeter shape from a fastener detail, then cross-check mesh or slat pattern before the installation begins.

Purchase Preparation

Retain the removed part until the replacement has been visually compared and test-positioned. Recorded packing is 68 × 48 × 44CM / 10PCS; reconfirm current packing when freight is quoted.

Procurement Checklist

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which Daewoo model does this page cover?

This grille version b is listed for Daewoo N300 / N400 / Cerato ’05. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Use the old component to check mesh or slat pattern and outer perimeter shape. Also state the installation side or position in the enquiry.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. The supplier can then review the product version, carton requirements and delivery options.