Fog Light Version B for Daewoo Trax ‘2014 / Trax ‘2017

Fog Light Version B for Daewoo Trax ‘2014 / Trax ‘2017: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the lighting inspection group.

Product Specifications

Workshop Comparison

This fog light version b is associated with Daewoo Trax ‘2014 / Trax ‘2017. Leave the reference-number field empty and use model, location, fasteners and visible shape for verification. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

The installation team should mark electrical plug and pin layout, capture mounting tabs around the housing, and capture lens profile and outer edge before the vehicle is dismantled. This route applies to the fog light version b shown for Daewoo Trax ‘2014 / Trax ‘2017.

If images accompany the enquiry, include a fixing-point close-up, a connector close-up, and an installation-opening picture. Label the evidence with the vehicle designation Daewoo Trax ‘2014 / Trax ‘2017 so the workshop and purchasing team review one configuration.

The installation team can begin with fixing-point close-up to mark electrical plug and pin layout. A second image should show left or right installation position from connector close-up. Before the vehicle is dismantled, capture lens profile and outer edge and note any difference from the removed component. Keep these observations with the Daewoo Trax ‘2014 / Trax ‘2017 vehicle record.

A vehicle inspector should inspect lens profile and outer edge from a corner-profile view, then review electrical plug and pin layout before the carton is allocated. The stock controller should inspect clearance beside bumper and grille from an original-label photograph, then align lens profile and outer edge before the repair schedule is finalized. The installation team should confirm clearance beside bumper and grille from an installation-opening picture, then measure lens profile and outer edge before the packing plan is prepared. A body-shop buyer should align lens profile and outer edge from a lower-retainer view, then review lens profile and outer edge before the stock request is released.

Repair Planning Notes

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Physical Fitment Points

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which Daewoo model does this page cover?

Application information points to Daewoo Trax ‘2014 / Trax ‘2017. A workshop should still compare the removed item and mounting location before ordering.

Which details help confirm the correct version?

Use the old component to check electrical plug and pin layout and left or right installation position. Also state the installation side or position in the enquiry.

What should a distributor send for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. State the required side or installation position where that detail applies.