Bumper Pressing-Strip for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05

Bumper Pressing-Strip for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This bumper pressing-strip is associated with Daewoo Matiz-Ii ’01 / Matiz-Iii ’05. Fitment review should begin with the vehicle and continue with holes, clips and surrounding clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A body-shop buyer should record overall corner curvature, capture bracket and bolt-hole spacing, and record upper edge alignment below the lamps before the replacement is test-positioned. This route applies to the bumper pressing-strip shown for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05.

If images accompany the enquiry, include a fixing-point close-up, a connector close-up, and a fixing-point close-up. Label the evidence with the vehicle designation Daewoo Matiz-Ii ’01 / Matiz-Iii ’05 so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with fixing-point close-up to record overall corner curvature. A second image should show lamp or grille openings from connector close-up. Before the replacement is test-positioned, capture upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Ii ’01 / Matiz-Iii ’05 vehicle record.

The procurement contact should confirm upper edge alignment below the lamps from a lower-retainer view, then mark lamp or grille openings before the repair schedule is finalized. The maintenance supervisor should compare upper edge alignment below the lamps from a chassis-plate image, then mark bracket and bolt-hole spacing before the stock request is released. The maintenance supervisor should assess overall corner curvature from an underside image, then note upper edge alignment below the lamps before the repair schedule is finalized. The service adviser should cross-check side-retainer engagement from a rear mounting view, then photograph side-retainer engagement before the quotation is approved.

Procurement Checklist

Keep protective wrapping in place where possible until the item has passed the initial comparison. Recorded packing is 65 × 40 × 40CM / 100PCS; reconfirm current packing when freight is quoted.

Installation Planning

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

How should the model application be interpreted?

Application information points to Daewoo Matiz-Ii ’01 / Matiz-Iii ’05. A workshop should still compare the removed item and mounting location before ordering.

How is the pictured version best verified?

Fitment evidence should show overall corner curvature, lamp or grille openings and the position where the component will be installed.

What information is needed for a quotation?

A complete sourcing request names the quantity, delivery market and the comparison information used. This information helps separate technical confirmation from the later shipping calculation.