Bumper Grille for Hyundai H100 / Porter’13 / Starles / Starex

Bumper Grille for Hyundai H100 / Porter’13 / Starles / Starex: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Pre-Order Inspection

This bumper grille is associated with Hyundai H100 / Porter’13 / Starles / Starex. The missing OEM reference is preserved deliberately so an internal code is not presented as an original number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The procurement contact should document overall corner curvature, compare bracket and bolt-hole spacing, and cross-check upper edge alignment below the lamps before the purchase order is issued. This route applies to the bumper grille shown for Hyundai H100 / Porter’13 / Starles / Starex.

If images accompany the enquiry, include a fastener detail, a vehicle-side photograph, and an original-label photograph. Label the evidence with the vehicle designation Hyundai H100 / Porter’13 / Starles / Starex so the workshop and purchasing team review one configuration.

The procurement contact can begin with fastener detail to document overall corner curvature. A second image should show lamp or grille openings from vehicle-side photograph. Before the purchase order is issued, compare upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai H100 / Porter’13 / Starles / Starex vehicle record.

The maintenance supervisor should cross-check overall corner curvature from a chassis-plate image, then measure lamp or grille openings before the replacement is test-positioned. A collision-repair specialist should cross-check side-retainer engagement from a lower-retainer view, then evaluate upper edge alignment below the lamps before the quotation is approved. The maintenance supervisor should inspect side-retainer engagement from a lower-retainer view, then compare bracket and bolt-hole spacing before the stock request is released. The stock controller should document overall corner curvature from a vehicle-side photograph, then cross-check upper edge alignment below the lamps before the quotation is approved.

Inspection Route

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. Recorded packing is 65 × 40 × 42CM / 20SET; reconfirm current packing when freight is quoted.

Ordering Information

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which Hyundai model does this page cover?

Application information points to Hyundai H100 / Porter’13 / Starles / Starex. A workshop should still compare the removed item and mounting location before ordering.

Which details help confirm the correct version?

The practical checks are overall corner curvature, lamp or grille openings and the surrounding clearance. Avoid choosing the item from the model name alone.

How should a wholesale request be submitted?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Providing the vehicle record at the start reduces follow-up questions during quotation.