96981088 Front Bumper for Daewoo Cruze ’09 / Cruze ’13

Front Bumper for Daewoo Cruze ’09 / Cruze ’13: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This front bumper is associated with Daewoo Cruze ’09 / Cruze ’13. If 96981088 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The installation team should photograph upper edge alignment below the lamps, align overall corner curvature, and compare side-retainer engagement before the stock request is released. This route applies to the front bumper shown for Daewoo Cruze ’09 / Cruze ’13.

If images accompany the enquiry, include a connector close-up, a fastener detail, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with connector close-up to photograph upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fastener detail. Before the stock request is released, align side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Cruze ’09 / Cruze ’13 vehicle record.

A body-shop buyer should mark lamp or grille openings from a rear mounting view, then mark overall corner curvature before the vehicle is dismantled. The installation team should photograph bracket and bolt-hole spacing from a fastener detail, then compare upper edge alignment below the lamps before the replacement is test-positioned. The maintenance supervisor should align overall corner curvature from a fixing-point close-up, then capture lamp or grille openings before the shipment is booked. A vehicle inspector should align side-retainer engagement from a fastener detail, then record bracket and bolt-hole spacing before the delivery plan is confirmed.

Installation Planning

Trial-position the component with nearby trim loosened only as required by workshop procedure. Recorded packing is 187 × 40 × 55CM / 3PCS; reconfirm current packing when freight is quoted.

Part Recognition Guide

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

The listing covers Daewoo Cruze ’09 / Cruze ’13. Because configurations may vary, check the actual installation area before approving the front bumper.

Which details help confirm the correct version?

Use the old component to check upper edge alignment below the lamps and bracket and bolt-hole spacing. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.