96831061 / 96831062 Headlight Assembly for Daewoo Aveo ’11

Headlight Assembly for Daewoo Aveo ’11: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Ordering Information

This headlight assembly is associated with Daewoo Aveo ’11. Write 96831061 / 96831062 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The service adviser should measure mounting tabs around the housing, cross-check left or right installation position, and verify electrical plug and pin layout before the packing plan is prepared. This route applies to the headlight assembly shown for Daewoo Aveo ’11.

If images accompany the enquiry, include a removed-part overview, a removed-part overview, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with removed-part overview to measure mounting tabs around the housing. A second image should show clearance beside bumper and grille from removed-part overview. Before the packing plan is prepared, cross-check electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’11 vehicle record.

The importing distributor should cross-check lens profile and outer edge from an upper-edge image, then cross-check electrical plug and pin layout before the delivery plan is confirmed. The receiving technician should review lens profile and outer edge from an adjacent-panel image, then align clearance beside bumper and grille before the stock request is released. A workshop estimator should mark clearance beside bumper and grille from a corner-profile view, then note lens profile and outer edge before the vehicle is dismantled. The procurement contact should confirm mounting tabs around the housing from a lower-retainer view, then confirm mounting tabs around the housing before the installation begins.

Buyer Verification Notes

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. Recorded packing is 56 × 53 × 54.5CM / 4PCS; reconfirm current packing when freight is quoted.

Application Review

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What model is associated with this replacement part?

Application information points to Daewoo Aveo ’11. A workshop should still compare the removed item and mounting location before ordering.

How is the pictured version best verified?

Ask the workshop to inspect mounting tabs around the housing together with clearance beside bumper and grille. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.