96600167 Front Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14

Front Bumper for Daewoo Matiz-Iii ’05 / Spark Lite ’14: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Ordering Information

This front bumper is associated with Daewoo Matiz-Iii ’05 / Spark Lite ’14. For purchasing documents, quote 96600167 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A vehicle inspector should cross-check overall corner curvature, document bracket and bolt-hole spacing, and document upper edge alignment below the lamps before the carton is allocated. This route applies to the front bumper shown for Daewoo Matiz-Iii ’05 / Spark Lite ’14.

If images accompany the enquiry, include a connector close-up, a fastener detail, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with connector close-up to cross-check overall corner curvature. A second image should show lamp or grille openings from fastener detail. Before the carton is allocated, document upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iii ’05 / Spark Lite ’14 vehicle record.

The stock controller should photograph side-retainer engagement from a fastener detail, then verify overall corner curvature before the fitment decision is signed off. The installation team should verify lamp or grille openings from a connector close-up, then document lamp or grille openings before the commercial request is submitted. A body-shop buyer should review bracket and bolt-hole spacing from a full component outline, then capture bracket and bolt-hole spacing before the fitment decision is signed off. The service adviser should verify side-retainer engagement from an adjacent-panel image, then measure overall corner curvature before the repair schedule is finalized.

Fitment Evidence

Retain the removed part until the replacement has been visually compared and test-positioned. Recorded packing is 180 × 30 × 44CM / 5PCS; reconfirm current packing when freight is quoted.

Buyer Verification Notes

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What vehicle information should be checked first?

The associated model designation is Daewoo Matiz-Iii ’05 / Spark Lite ’14. Confirm the body or electrical configuration relevant to this front bumper.

What should a workshop inspect before purchase?

The practical checks are overall corner curvature, lamp or grille openings and the surrounding clearance. Avoid choosing the item from the model name alone.

What should be included in a B2B enquiry?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Providing the vehicle record at the start reduces follow-up questions during quotation.