96563988 Front Bumper for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05
- OEM replacement reference: 96563988
- Front bumper application: Daewoo Matiz-Ii ’01 / Matiz-Iii ’05
- Compare the complete upper grille opening and lower air-inlet contour
- Inspect the wheel-arch returns, tow-eye area and side retaining guides
- Measure every mounting point before painting or permanent installation
- Use front, rear and corner photographs of the removed bumper for review
- Request current packing, availability and freight terms for the destination
Front Bumper for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.
Product Specifications
| Product name | Front Bumper |
|---|---|
| OEM replacement reference | 96563988 |
| Vehicle model | Daewoo Matiz-Ii ’01 / Matiz-Iii ’05 |
| Component area | Bumper |
| Primary comparison | bracket and bolt-hole spacing |
| Secondary comparison | side-retainer engagement |
| Packing information | 156 × 35 × 38CM / 5PCS |
| Fitment confirmation | the receiving technician should document upper edge alignment below the lamps before the replacement is test-positioned |
Repair Planning Notes
This front bumper is associated with Daewoo Matiz-Ii ’01 / Matiz-Iii ’05. Include 96563988 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.
Installation Planning
- Bracket and bolt-hole spacing
- Lamp or grille openings
- Side-retainer engagement
- Upper edge alignment below the lamps
- Overall corner curvature
The receiving technician should document bracket and bolt-hole spacing, capture lamp or grille openings, and capture overall corner curvature before the replacement is test-positioned. This route applies to the front bumper shown for Daewoo Matiz-Ii ’01 / Matiz-Iii ’05.
If images accompany the enquiry, include a chassis-plate image, an installation-opening picture, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.
The receiving technician can begin with chassis-plate image to document bracket and bolt-hole spacing. A second image should show side-retainer engagement from installation-opening picture. Before the replacement is test-positioned, capture overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Ii ’01 / Matiz-Iii ’05 vehicle record.
The stock controller should evaluate side-retainer engagement from a chassis-plate image, then capture overall corner curvature before the replacement is test-positioned. The service adviser should measure side-retainer engagement from a full component outline, then confirm side-retainer engagement before the vehicle is dismantled. The maintenance supervisor should align upper edge alignment below the lamps from a vehicle-side photograph, then mark side-retainer engagement before the fitment decision is signed off. The maintenance supervisor should review side-retainer engagement from a connector close-up, then cross-check lamp or grille openings before the shipment is booked.
Vehicle Confirmation
Support long or flexible parts evenly during trial fitting so their natural outline can be judged. Recorded packing is 156 × 35 × 38CM / 5PCS; reconfirm current packing when freight is quoted.
Identification Summary
A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.
Purchase Questions
What is the listed vehicle application?
Application information points to Daewoo Matiz-Ii ’01 / Matiz-Iii ’05. A workshop should still compare the removed item and mounting location before ordering.
Which details help confirm the correct version?
Compare bracket and bolt-hole spacing, side-retainer engagement and the required installation position with the removed component. VIN or chassis details add another useful check.
What should a distributor send for a quotation?
A complete sourcing request names the quantity, delivery market and the comparison information used. Keep each requested product on a separate line when several parts share one shipment.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
