96545493 Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Front Bumper for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the bumper inspection group.

Product Specifications

Fitment Evidence

This front bumper is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. If 96545493 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

A workshop estimator should inspect bracket and bolt-hole spacing, note lamp or grille openings, and review overall corner curvature before the delivery plan is confirmed. This route applies to the front bumper shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include a chassis-plate image, an underside image, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with chassis-plate image to inspect bracket and bolt-hole spacing. A second image should show side-retainer engagement from underside image. Before the delivery plan is confirmed, note overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

The service adviser should align upper edge alignment below the lamps from a connector close-up, then assess overall corner curvature before the quotation is approved. The receiving technician should inspect lamp or grille openings from an upper-edge image, then note overall corner curvature before the shipment is booked. The maintenance supervisor should measure overall corner curvature from a removed-part overview, then note lamp or grille openings before the installation begins. The receiving technician should verify bracket and bolt-hole spacing from a lower-retainer view, then review overall corner curvature before the installation begins.

Technical Comparison Notes

Arrange a dry comparison before final fastening, and stop if holes or clips need force to line up. Recorded packing is 182 × 37 × 40CM / 5PCS; reconfirm current packing when freight is quoted.

Reference Check

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

The associated model designation is Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Confirm the body or electrical configuration relevant to this front bumper.

How is the pictured version best verified?

Photograph bracket and bolt-hole spacing and the mounting area around side-retainer engagement. Combine those images with vehicle identification data for review.

What should be included in a B2B enquiry?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.