96545491 Front Bumper for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Front Bumper for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: Use this listing as a practical identification record before requesting price and freight. The component belongs to the bumper inspection group.

Product Specifications

Component Matching Record

This front bumper is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Use 96545491 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The maintenance supervisor should assess side-retainer engagement, document upper edge alignment below the lamps, and capture lamp or grille openings before the carton is allocated. This route applies to the front bumper shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include a rear mounting view, an upper-edge image, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with rear mounting view to assess side-retainer engagement. A second image should show overall corner curvature from upper-edge image. Before the carton is allocated, document lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

A vehicle inspector should cross-check bracket and bolt-hole spacing from a removed-part overview, then evaluate overall corner curvature before the shipment is booked. The stock controller should align overall corner curvature from an adjacent-panel image, then measure bracket and bolt-hole spacing before the vehicle is dismantled. A workshop estimator should mark overall corner curvature from a fixing-point close-up, then measure overall corner curvature before the vehicle is dismantled. A vehicle inspector should note overall corner curvature from a vehicle-side photograph, then measure upper edge alignment below the lamps before the packing plan is prepared.

Installation Planning

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What is the listed vehicle application?

This page associates the front bumper with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

Check side-retainer engagement, confirm overall corner curvature, and retain the removed part until the replacement has been compared side by side.

How can a trade buyer request pricing?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. State the required side or installation position where that detail applies.