96540268 / 96540269 Tail Light Assembly for Daewoo Spark ’18 Beat 4d / Kalos ’02

Tail Light Assembly for Daewoo Spark ’18 Beat 4d / Kalos ’02: Use this listing as a practical identification record before requesting price and freight. The component belongs to the lighting inspection group.

Product Specifications

Purchase Preparation

This tail light assembly is associated with Daewoo Spark ’18 Beat 4d / Kalos ’02. The OEM entry 96540268 / 96540269 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Fitment Evidence

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

A vehicle inspector should note left or right installation position, record clearance beside bumper and grille, and assess mounting tabs around the housing before the vehicle is dismantled. This route applies to the tail light assembly shown for Daewoo Spark ’18 Beat 4d / Kalos ’02.

If images accompany the enquiry, include a fixing-point close-up, a removed-part overview, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with fixing-point close-up to note left or right installation position. A second image should show lens profile and outer edge from removed-part overview. Before the vehicle is dismantled, record mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Beat 4d / Kalos ’02 vehicle record.

The repair planner should inspect mounting tabs around the housing from a lower-retainer view, then measure electrical plug and pin layout before the stock request is released. The receiving technician should inspect electrical plug and pin layout from a connector close-up, then mark clearance beside bumper and grille before the quotation is approved. The procurement contact should inspect lens profile and outer edge from a vehicle-side photograph, then photograph electrical plug and pin layout before the fitment decision is signed off. The importing distributor should align mounting tabs around the housing from a fastener detail, then note mounting tabs around the housing before the vehicle is dismantled.

Workshop Comparison

Transfer reusable hardware only after checking that every retainer matches the replacement openings. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

This tail light assembly is listed for Daewoo Spark ’18 Beat 4d / Kalos ’02. Use that designation as a starting point and verify the vehicle configuration before ordering.

How should fitment be checked before ordering?

Fitment evidence should show left or right installation position, lens profile and outer edge and the position where the component will be installed.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Add vehicle details so availability and packing can be checked against the requested version.