96398984 Engine Cover Lower for Daewoo Spark ’18 Beat 4d / Kalos ’02

Engine Cover Lower for Daewoo Spark ’18 Beat 4d / Kalos ’02: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the cover inspection group.

Product Specifications

Purchase Preparation

This engine cover lower is associated with Daewoo Spark ’18 Beat 4d / Kalos ’02. An OEM match to 96398984 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Supply Enquiry Details

• Installation orientation
• Perimeter outline
• Fastener holes
• Clip locations
• Edge overlap

The stock controller should record installation orientation, review perimeter outline, and mark edge overlap before the vehicle is dismantled. This route applies to the engine cover lower shown for Daewoo Spark ’18 Beat 4d / Kalos ’02.

If images accompany the enquiry, include a corner-profile view, a full component outline, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with corner-profile view to record installation orientation. A second image should show fastener holes from full component outline. Before the vehicle is dismantled, review edge overlap and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Beat 4d / Kalos ’02 vehicle record.

A vehicle inspector should mark fastener holes from a vehicle-side photograph, then cross-check installation orientation before the repair schedule is finalized. The maintenance supervisor should note perimeter outline from a removed-part overview, then verify installation orientation before the quotation is approved. The service adviser should confirm fastener holes from an original-label photograph, then compare installation orientation before the delivery plan is confirmed. A workshop estimator should note fastener holes from a fixing-point close-up, then compare edge overlap before the carton is allocated.

Procurement Checklist

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. No packing entry is published here; request current carton and quantity information with the quotation.

Workshop Comparison

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

Which vehicle record belongs with this product?

The stated vehicle is Daewoo Spark ’18 Beat 4d / Kalos ’02. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Use the old component to check installation orientation and fastener holes. Also state the installation side or position in the enquiry.

What should a distributor send for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.