96179910 / 96179909 Tail Light Assembly for Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00

Tail Light Assembly for Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the lighting inspection group.

Product Specifications

Ordering Information

This tail light assembly is associated with Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00. If 96179910 / 96179909 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The service adviser should trace mounting tabs around the housing, confirm left or right installation position, and record electrical plug and pin layout before the installation begins. This route applies to the tail light assembly shown for Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00.

If images accompany the enquiry, include a straight-on view, a corner-profile view, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with straight-on view to trace mounting tabs around the housing. A second image should show clearance beside bumper and grille from corner-profile view. Before the installation begins, confirm electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00 vehicle record.

The service adviser should review mounting tabs around the housing from an underside image, then note left or right installation position before the packing plan is prepared. The maintenance supervisor should photograph mounting tabs around the housing from a connector close-up, then measure left or right installation position before the shipment is booked. The importing distributor should document lens profile and outer edge from a lower-retainer view, then align left or right installation position before the carton is allocated. A vehicle inspector should review electrical plug and pin layout from a corner-profile view, then document electrical plug and pin layout before the fitment decision is signed off.

Pre-Order Inspection

Trial-position the component with nearby trim loosened only as required by workshop procedure. Recorded packing is PCS; reconfirm current packing when freight is quoted.

Replacement Selection Guide

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

This tail light assembly is listed for Daewoo Leganza ’97 / Cielo ’96 / Rarcer ’00. Use that designation as a starting point and verify the vehicle configuration before ordering.

How should fitment be checked before ordering?

Compare mounting tabs around the housing, clearance beside bumper and grille and the required installation position with the removed component. VIN or chassis details add another useful check.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Keep each requested product on a separate line when several parts share one shipment.