96134442D Rear Bumper for Daewoo Espero / Espero ’96 / Aveo ’04

Rear Bumper for Daewoo Espero / Espero ’96 / Aveo ’04: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This rear bumper is associated with Daewoo Espero / Espero ’96 / Aveo ’04. A search enquiry may include 96134442D; the order should also state the vehicle and required side. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Inspection Route

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The service adviser should assess lamp or grille openings, capture side-retainer engagement, and confirm bracket and bolt-hole spacing before the purchase order is issued. This route applies to the rear bumper shown for Daewoo Espero / Espero ’96 / Aveo ’04.

If images accompany the enquiry, include a fastener detail, an adjacent-panel image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with fastener detail to assess lamp or grille openings. A second image should show upper edge alignment below the lamps from adjacent-panel image. Before the purchase order is issued, capture bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Daewoo Espero / Espero ’96 / Aveo ’04 vehicle record.

The receiving technician should document lamp or grille openings from a removed-part overview, then measure lamp or grille openings before the purchase order is issued. A vehicle inspector should trace bracket and bolt-hole spacing from a fixing-point close-up, then align side-retainer engagement before the installation begins. The procurement contact should align side-retainer engagement from a fastener detail, then align bracket and bolt-hole spacing before the fitment decision is signed off. The repair planner should assess lamp or grille openings from an underside image, then review lamp or grille openings before the purchase order is issued.

Supply Enquiry Details

Place old and replacement components side by side, then review every fixing point before installation. No packing entry is published here; request current carton and quantity information with the quotation.

Identification Summary

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

This rear bumper appears under Daewoo Espero / Espero ’96 / Aveo ’04. Review the exact vehicle version rather than relying on the model name by itself.

How should fitment be checked before ordering?

Check lamp or grille openings, confirm upper edge alignment below the lamps, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Send the order volume and destination together with VIN or chassis information where available. State the required side or installation position where that detail applies.