94761404 / 94761405 Corner Bumper for Daewoo Agile ’09-’13 / Sail ’06 / Corsa

Corner Bumper for Daewoo Agile ’09-’13 / Sail ’06 / Corsa: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Buyer Verification Notes

This corner bumper is associated with Daewoo Agile ’09-’13 / Sail ’06 / Corsa. The OEM entry 94761404 / 94761405 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The receiving technician should trace bracket and bolt-hole spacing, compare lamp or grille openings, and inspect overall corner curvature before the carton is allocated. This route applies to the corner bumper shown for Daewoo Agile ’09-’13 / Sail ’06 / Corsa.

If images accompany the enquiry, include an upper-edge image, a full component outline, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with upper-edge image to trace bracket and bolt-hole spacing. A second image should show side-retainer engagement from full component outline. Before the carton is allocated, compare overall corner curvature and note any difference from the removed component. Keep these observations with the Daewoo Agile ’09-’13 / Sail ’06 / Corsa vehicle record.

A workshop estimator should mark bracket and bolt-hole spacing from a fixing-point close-up, then inspect lamp or grille openings before the replacement is test-positioned. The maintenance supervisor should photograph upper edge alignment below the lamps from a removed-part overview, then capture bracket and bolt-hole spacing before the packing plan is prepared. The receiving technician should capture upper edge alignment below the lamps from a side-profile photograph, then align lamp or grille openings before the shipment is booked. The importing distributor should trace bracket and bolt-hole spacing from a fixing-point close-up, then mark upper edge alignment below the lamps before the stock request is released.

Workshop Comparison

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Configuration Check

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle record belongs with this product?

The listing covers Daewoo Agile ’09-’13 / Sail ’06 / Corsa. Because configurations may vary, check the actual installation area before approving the corner bumper.

What should be compared with the removed component?

Compare bracket and bolt-hole spacing, side-retainer engagement and the required installation position with the removed component. VIN or chassis details add another useful check.

How should a wholesale request be submitted?

Send the order volume and destination together with VIN or chassis information where available. This information helps separate technical confirmation from the later shipping calculation.