92405-H6500 / 92406-H6500 Rear Bumper Lamp for Hyundai Accent ’17 / Accent ’21

Rear Bumper Lamp for Hyundai Accent ’17 / Accent ’21: The following information supports a structured pre-order check for trade buyers. The component belongs to the lighting inspection group.

Product Specifications

Repair Planning Notes

This rear bumper lamp is associated with Hyundai Accent ’17 / Accent ’21. Record 92405-H6500 / 92406-H6500 and compare it with the old part before asking for availability. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

A vehicle inspector should inspect mounting tabs around the housing, document left or right installation position, and cross-check electrical plug and pin layout before the vehicle is dismantled. This route applies to the rear bumper lamp shown for Hyundai Accent ’17 / Accent ’21.

If images accompany the enquiry, include a removed-part overview, a lower-retainer view, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with removed-part overview to inspect mounting tabs around the housing. A second image should show clearance beside bumper and grille from lower-retainer view. Before the vehicle is dismantled, document electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Accent ’17 / Accent ’21 vehicle record.

The maintenance supervisor should document electrical plug and pin layout from a fastener detail, then cross-check clearance beside bumper and grille before the vehicle is dismantled. A vehicle inspector should capture mounting tabs around the housing from a vehicle-side photograph, then align mounting tabs around the housing before the packing plan is prepared. The service adviser should photograph lens profile and outer edge from a fastener detail, then align mounting tabs around the housing before the installation begins. The procurement contact should record clearance beside bumper and grille from a full component outline, then mark electrical plug and pin layout before the packing plan is prepared.

Identification Summary

For electrical items, disconnect power according to workshop practice and compare plug orientation first. No packing entry is published here; request current carton and quantity information with the quotation.

Component Matching Record

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

The stated vehicle is Hyundai Accent ’17 / Accent ’21. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Check mounting tabs around the housing, confirm clearance beside bumper and grille, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

For a trade enquiry, include required units, delivery location and photographs of the original component. State the required side or installation position where that detail applies.