92101-B4500 / 92102-B4500 Headlight Assembly for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d

Headlight Assembly for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the lighting inspection group.

Product Specifications

Technical Comparison Notes

This headlight assembly is associated with Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. An OEM match to 92101-B4500 / 92102-B4500 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Fitment Evidence

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The procurement contact should confirm mounting tabs around the housing, compare left or right installation position, and compare electrical plug and pin layout before the delivery plan is confirmed. This route applies to the headlight assembly shown for Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d.

If images accompany the enquiry, include a side-profile photograph, a fixing-point close-up, and a lower-retainer view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with side-profile photograph to confirm mounting tabs around the housing. A second image should show clearance beside bumper and grille from fixing-point close-up. Before the delivery plan is confirmed, compare electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d vehicle record.

The repair planner should record lens profile and outer edge from a lower-retainer view, then confirm electrical plug and pin layout before the repair schedule is finalized. The service adviser should trace clearance beside bumper and grille from a side-profile photograph, then compare left or right installation position before the carton is allocated. The stock controller should capture lens profile and outer edge from a straight-on view, then trace electrical plug and pin layout before the carton is allocated. The stock controller should mark mounting tabs around the housing from a straight-on view, then verify clearance beside bumper and grille before the quotation is approved.

Configuration Check

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Physical Fitment Points

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What is the listed vehicle application?

Application information points to Hyundai I10 ‘2017 4d / Grand I10 ’21 / Nios 5d. A workshop should still compare the removed item and mounting location before ordering.

How can an incorrect order be avoided?

Fitment evidence should show mounting tabs around the housing, clearance beside bumper and grille and the position where the component will be installed.

How should a wholesale request be submitted?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.