92101-1R730 / 92102-1R730 Electric Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16

Electric Headlight Assembly for Hyundai Accent / Accent ’14 / Solaris ’16: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Procurement Checklist

This electric headlight assembly is associated with Hyundai Accent / Accent ’14 / Solaris ’16. The numbers 92101-1R730 / 92102-1R730 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

The installation team should compare left or right installation position, align clearance beside bumper and grille, and mark mounting tabs around the housing before the packing plan is prepared. This route applies to the electric headlight assembly shown for Hyundai Accent / Accent ’14 / Solaris ’16.

If images accompany the enquiry, include a lower-retainer view, an adjacent-panel image, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with lower-retainer view to compare left or right installation position. A second image should show lens profile and outer edge from adjacent-panel image. Before the packing plan is prepared, align mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Hyundai Accent / Accent ’14 / Solaris ’16 vehicle record.

The installation team should measure electrical plug and pin layout from a vehicle-side photograph, then verify electrical plug and pin layout before the vehicle is dismantled. A vehicle inspector should document lens profile and outer edge from a rear mounting view, then confirm mounting tabs around the housing before the quotation is approved. The importing distributor should verify lens profile and outer edge from an original-label photograph, then assess lens profile and outer edge before the vehicle is dismantled. A body-shop buyer should note electrical plug and pin layout from a vehicle-side photograph, then verify electrical plug and pin layout before the delivery plan is confirmed.

Inspection Route

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 76 × 71 × 50 × 50CM / 6PCS; reconfirm current packing when freight is quoted.

Supply Enquiry Details

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What vehicle information should be checked first?

This electric headlight assembly is listed for Hyundai Accent / Accent ’14 / Solaris ’16. Use that designation as a starting point and verify the vehicle configuration before ordering.

What evidence is useful for a fitment review?

Fitment evidence should show left or right installation position, lens profile and outer edge and the position where the component will be installed.

What information is needed for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. The supplier can then review the product version, carton requirements and delivery options.