9070450 Tail Light Assembly for Daewoo Sail ‘2010

Tail Light Assembly for Daewoo Sail ‘2010: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Buyer Verification Notes

This tail light assembly is associated with Daewoo Sail ‘2010. Use 9070450 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position

A collision-repair specialist should note clearance beside bumper and grille, record lens profile and outer edge, and document left or right installation position before the fitment decision is signed off. This route applies to the tail light assembly shown for Daewoo Sail ‘2010.

If images accompany the enquiry, include an original-label photograph, a removed-part overview, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with original-label photograph to note clearance beside bumper and grille. A second image should show electrical plug and pin layout from removed-part overview. Before the fitment decision is signed off, record left or right installation position and note any difference from the removed component. Keep these observations with the Daewoo Sail ‘2010 vehicle record.

The receiving technician should trace electrical plug and pin layout from an underside image, then inspect clearance beside bumper and grille before the carton is allocated. The service adviser should confirm mounting tabs around the housing from a straight-on view, then mark left or right installation position before the stock request is released. The receiving technician should record left or right installation position from a fixing-point close-up, then verify lens profile and outer edge before the replacement is test-positioned. The installation team should capture left or right installation position from an underside image, then review clearance beside bumper and grille before the packing plan is prepared.

Supply Enquiry Details

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. Recorded packing is 95 × 46 × 63CM / 10PCS; reconfirm current packing when freight is quoted.

Replacement Selection Guide

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What model is associated with this replacement part?

The listing covers Daewoo Sail ‘2010. Because configurations may vary, check the actual installation area before approving the tail light assembly.

How can an incorrect order be avoided?

Ask the workshop to inspect clearance beside bumper and grille together with electrical plug and pin layout. VIN or chassis information can clarify market-specific differences.

How can a trade buyer request pricing?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.