9033581 Rear Bumper for Daewoo Sail ‘2010 / Sail ‘2015

Rear Bumper for Daewoo Sail ‘2010 / Sail ‘2015: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This rear bumper is associated with Daewoo Sail ‘2010 / Sail ‘2015. An OEM match to 9033581 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The receiving technician should capture upper edge alignment below the lamps, note overall corner curvature, and review side-retainer engagement before the vehicle is dismantled. This route applies to the rear bumper shown for Daewoo Sail ‘2010 / Sail ‘2015.

If images accompany the enquiry, include a lower-retainer view, a corner-profile view, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with lower-retainer view to capture upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from corner-profile view. Before the vehicle is dismantled, note side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Sail ‘2010 / Sail ‘2015 vehicle record.

The repair planner should evaluate lamp or grille openings from a lower-retainer view, then confirm upper edge alignment below the lamps before the stock request is released. The parts coordinator should assess upper edge alignment below the lamps from a connector close-up, then mark bracket and bolt-hole spacing before the shipment is booked. The receiving technician should mark side-retainer engagement from a connector close-up, then inspect side-retainer engagement before the replacement is test-positioned. A vehicle inspector should review side-retainer engagement from an underside image, then record upper edge alignment below the lamps before the commercial request is submitted.

Technical Comparison Notes

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Pre-Order Inspection

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

How should the model application be interpreted?

The associated model designation is Daewoo Sail ‘2010 / Sail ‘2015. Confirm the body or electrical configuration relevant to this rear bumper.

How can an incorrect order be avoided?

Check upper edge alignment below the lamps, confirm bracket and bolt-hole spacing, and retain the removed part until the replacement has been compared side by side.

How can a trade buyer request pricing?

For a trade enquiry, include required units, delivery location and photographs of the original component. Keep each requested product on a separate line when several parts share one shipment.