86811-0X200 / 86812-0X200 Inner Lining for Hyundai I10 ’11 / I10 ‘2014

Inner Lining for Hyundai I10 ’11 / I10 ‘2014: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the body inspection group.

Product Specifications

Procurement Checklist

This inner lining is associated with Hyundai I10 ’11 / I10 ‘2014. Include 86811-0X200 / 86812-0X200 in a wholesale enquiry so the item can be reviewed against the vehicle data. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Opening and hole pattern
• Left or right orientation
• Panel contour
• Bolt and clip locations
• Wheel-arch or lamp clearance

The stock controller should capture opening and hole pattern, photograph left or right orientation, and record wheel-arch or lamp clearance before the quotation is approved. This route applies to the inner lining shown for Hyundai I10 ’11 / I10 ‘2014.

If images accompany the enquiry, include a fastener detail, a chassis-plate image, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with fastener detail to capture opening and hole pattern. A second image should show panel contour from chassis-plate image. Before the quotation is approved, photograph wheel-arch or lamp clearance and note any difference from the removed component. Keep these observations with the Hyundai I10 ’11 / I10 ‘2014 vehicle record.

The service adviser should review opening and hole pattern from a chassis-plate image, then photograph wheel-arch or lamp clearance before the vehicle is dismantled. A vehicle inspector should review bolt and clip locations from a straight-on view, then capture opening and hole pattern before the vehicle is dismantled. The installation team should cross-check panel contour from a removed-part overview, then document bolt and clip locations before the delivery plan is confirmed. The importing distributor should note opening and hole pattern from a full component outline, then measure wheel-arch or lamp clearance before the delivery plan is confirmed.

Ordering Information

Transfer reusable hardware only after checking that every retainer matches the replacement openings. Recorded packing is 150 × 22 × 25CM / 10PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What vehicle information should be checked first?

The associated model designation is Hyundai I10 ’11 / I10 ‘2014. Confirm the body or electrical configuration relevant to this inner lining.

What should a workshop inspect before purchase?

The practical checks are opening and hole pattern, panel contour and the surrounding clearance. Avoid choosing the item from the model name alone.

What information helps confirm availability?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.