86811-0X000 / 86812-0X000 Liner Fender for Hyundai Mega Truck / I10 ’07

Liner Fender for Hyundai Mega Truck / I10 ’07: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the body inspection group.

Product Specifications

Purchase Preparation

This liner fender is associated with Hyundai Mega Truck / I10 ’07. The numbers 86811-0X000 / 86812-0X000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Left or right orientation
• Panel contour
• Bolt and clip locations
• Wheel-arch or lamp clearance
• Opening and hole pattern

A workshop estimator should assess left or right orientation, evaluate panel contour, and capture opening and hole pattern before the packing plan is prepared. This route applies to the liner fender shown for Hyundai Mega Truck / I10 ’07.

If images accompany the enquiry, include a rear mounting view, an adjacent-panel image, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with rear mounting view to assess left or right orientation. A second image should show bolt and clip locations from adjacent-panel image. Before the packing plan is prepared, evaluate opening and hole pattern and note any difference from the removed component. Keep these observations with the Hyundai Mega Truck / I10 ’07 vehicle record.

A vehicle inspector should compare left or right orientation from a removed-part overview, then compare bolt and clip locations before the stock request is released. The procurement contact should mark opening and hole pattern from a vehicle-side photograph, then review opening and hole pattern before the quotation is approved. A workshop estimator should align wheel-arch or lamp clearance from an upper-edge image, then confirm panel contour before the fitment decision is signed off. A vehicle inspector should confirm left or right orientation from an original-label photograph, then note left or right orientation before the vehicle is dismantled.

Pre-Order Inspection

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This liner fender is listed for Hyundai Mega Truck / I10 ’07. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

Use the old component to check left or right orientation and bolt and clip locations. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

For a trade enquiry, include required units, delivery location and photographs of the original component. This information helps separate technical confirmation from the later shipping calculation.