86631-2H010 Rear Bumper Support for Hyundai Elantra ’07 / Elantra ’11

Rear Bumper Support for Hyundai Elantra ’07 / Elantra ’11: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This rear bumper support is associated with Hyundai Elantra ’07 / Elantra ’11. Use 86631-2H010 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The receiving technician should capture lamp or grille openings, capture side-retainer engagement, and compare bracket and bolt-hole spacing before the repair schedule is finalized. This route applies to the rear bumper support shown for Hyundai Elantra ’07 / Elantra ’11.

If images accompany the enquiry, include an underside image, an upper-edge image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with underside image to capture lamp or grille openings. A second image should show upper edge alignment below the lamps from upper-edge image. Before the repair schedule is finalized, capture bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’07 / Elantra ’11 vehicle record.

A workshop estimator should verify upper edge alignment below the lamps from an original-label photograph, then photograph upper edge alignment below the lamps before the repair schedule is finalized. The receiving technician should measure upper edge alignment below the lamps from an underside image, then evaluate overall corner curvature before the carton is allocated. The stock controller should cross-check side-retainer engagement from a side-profile photograph, then align lamp or grille openings before the stock request is released. A vehicle inspector should measure overall corner curvature from a full component outline, then cross-check side-retainer engagement before the purchase order is issued.

Vehicle-Side Evidence

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

The listing covers Hyundai Elantra ’07 / Elantra ’11. Because configurations may vary, check the actual installation area before approving the rear bumper support.

What should be compared with the removed component?

Photograph lamp or grille openings and the mounting area around upper edge alignment below the lamps. Combine those images with vehicle identification data for review.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Packing and freight can be discussed after the component version has been identified.