86611-3S000 Rear Bumper for Hyundai Sonata ’11-’13 / Sonata ’14

Rear Bumper for Hyundai Sonata ’11-’13 / Sonata ’14: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This rear bumper is associated with Hyundai Sonata ’11-’13 / Sonata ’14. If 86611-3S000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Component Matching Record

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

A workshop estimator should mark upper edge alignment below the lamps, document overall corner curvature, and document side-retainer engagement before the packing plan is prepared. This route applies to the rear bumper shown for Hyundai Sonata ’11-’13 / Sonata ’14.

If images accompany the enquiry, include an original-label photograph, a vehicle-side photograph, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with original-label photograph to mark upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from vehicle-side photograph. Before the packing plan is prepared, document side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’11-’13 / Sonata ’14 vehicle record.

The maintenance supervisor should evaluate overall corner curvature from a fixing-point close-up, then align lamp or grille openings before the stock request is released. The procurement contact should record upper edge alignment below the lamps from a fixing-point close-up, then inspect bracket and bolt-hole spacing before the delivery plan is confirmed. The installation team should review lamp or grille openings from a corner-profile view, then document side-retainer engagement before the replacement is test-positioned. A workshop estimator should compare side-retainer engagement from a full component outline, then measure side-retainer engagement before the commercial request is submitted.

Application Review

Support long or flexible parts evenly during trial fitting so their natural outline can be judged. No packing entry is published here; request current carton and quantity information with the quotation.

Installation Planning

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle record belongs with this product?

This rear bumper is listed for Hyundai Sonata ’11-’13 / Sonata ’14. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

Review upper edge alignment below the lamps first, then inspect bracket and bolt-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What information is needed for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.