86610-3K800 Rear Bumper for Hyundai Sonata ’08 / Sonata ’11-’13

Rear Bumper for Hyundai Sonata ’08 / Sonata ’11-’13: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This rear bumper is associated with Hyundai Sonata ’08 / Sonata ’11-’13. Use 86610-3K800 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The parts coordinator should assess side-retainer engagement, verify upper edge alignment below the lamps, and document lamp or grille openings before the installation begins. This route applies to the rear bumper shown for Hyundai Sonata ’08 / Sonata ’11-’13.

If images accompany the enquiry, include a straight-on view, a connector close-up, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with straight-on view to assess side-retainer engagement. A second image should show overall corner curvature from connector close-up. Before the installation begins, verify lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’08 / Sonata ’11-’13 vehicle record.

The service adviser should trace upper edge alignment below the lamps from an installation-opening picture, then assess bracket and bolt-hole spacing before the purchase order is issued. A workshop estimator should confirm overall corner curvature from a fixing-point close-up, then trace overall corner curvature before the vehicle is dismantled. The maintenance supervisor should inspect overall corner curvature from a side-profile photograph, then note lamp or grille openings before the stock request is released. A vehicle inspector should compare upper edge alignment below the lamps from an adjacent-panel image, then compare overall corner curvature before the repair schedule is finalized.

Procurement Checklist

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle Confirmation

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle is this component listed for?

The stated vehicle is Hyundai Sonata ’08 / Sonata ’11-’13. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How can an incorrect order be avoided?

Check side-retainer engagement, confirm overall corner curvature, and retain the removed part until the replacement has been compared side by side.

How should a wholesale request be submitted?

For a trade enquiry, include required units, delivery location and photographs of the original component. Include clear original-part photographs when the exact configuration needs further review.