86580-4H000 Wind Window of Front Bumper for Hyundai Starex ’08

Wind Window of Front Bumper for Hyundai Starex ’08: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Workshop Comparison

This wind window of front bumper is associated with Hyundai Starex ’08. Treat 86580-4H000 as an identification route, then validate the component at the actual mounting area. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Technical Comparison Notes

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The importing distributor should cross-check upper edge alignment below the lamps, document overall corner curvature, and mark side-retainer engagement before the delivery plan is confirmed. This route applies to the wind window of front bumper shown for Hyundai Starex ’08.

If images accompany the enquiry, include a chassis-plate image, a straight-on view, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with chassis-plate image to cross-check upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from straight-on view. Before the delivery plan is confirmed, document side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Starex ’08 vehicle record.

A workshop estimator should review upper edge alignment below the lamps from an adjacent-panel image, then measure side-retainer engagement before the delivery plan is confirmed. A workshop estimator should measure lamp or grille openings from a fastener detail, then measure upper edge alignment below the lamps before the installation begins. The repair planner should note lamp or grille openings from a corner-profile view, then evaluate bracket and bolt-hole spacing before the shipment is booked. The importing distributor should verify bracket and bolt-hole spacing from an original-label photograph, then review bracket and bolt-hole spacing before the shipment is booked.

Procurement Checklist

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 170 × 45 × 35CM / 20PCS; reconfirm current packing when freight is quoted.

Configuration Check

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What vehicle information should be checked first?

The stated vehicle is Hyundai Starex ’08. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How can an incorrect order be avoided?

Check upper edge alignment below the lamps, confirm bracket and bolt-hole spacing, and retain the removed part until the replacement has been compared side by side.

How should a wholesale request be submitted?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. State the required side or installation position where that detail applies.