86561-3X000 Bumper Grille for Hyundai Elantra ’07 / Elantra ’11

Bumper Grille for Hyundai Elantra ’07 / Elantra ’11: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Ordering Information

This bumper grille is associated with Hyundai Elantra ’07 / Elantra ’11. The numbers 86561-3X000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should note bracket and bolt-hole spacing, document lamp or grille openings, and verify overall corner curvature before the commercial request is submitted. This route applies to the bumper grille shown for Hyundai Elantra ’07 / Elantra ’11.

If images accompany the enquiry, include a lower-retainer view, a lower-retainer view, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with lower-retainer view to note bracket and bolt-hole spacing. A second image should show side-retainer engagement from lower-retainer view. Before the commercial request is submitted, document overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’07 / Elantra ’11 vehicle record.

The procurement contact should confirm overall corner curvature from a connector close-up, then record bracket and bolt-hole spacing before the stock request is released. A collision-repair specialist should assess upper edge alignment below the lamps from a corner-profile view, then assess upper edge alignment below the lamps before the repair schedule is finalized. The stock controller should assess bracket and bolt-hole spacing from a removed-part overview, then mark side-retainer engagement before the fitment decision is signed off. The importing distributor should photograph side-retainer engagement from a rear mounting view, then compare bracket and bolt-hole spacing before the stock request is released.

Commercial Request Details

Trial-position the component with nearby trim loosened only as required by workshop procedure. Recorded packing is 102 × 31 × 18CM / 10PCS; reconfirm current packing when freight is quoted.

Installation Planning

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What is the listed vehicle application?

The associated model designation is Hyundai Elantra ’07 / Elantra ’11. Confirm the body or electrical configuration relevant to this bumper grille.

How is the pictured version best verified?

Use the old component to check bracket and bolt-hole spacing and side-retainer engagement. Also state the installation side or position in the enquiry.

What should be included in a B2B enquiry?

For a trade enquiry, include required units, delivery location and photographs of the original component. The supplier can then review the product version, carton requirements and delivery options.