86561-3K500 Front Bumper Grille for Hyundai Sonata ’04 / Sonata ’08

Front Bumper Grille for Hyundai Sonata ’04 / Sonata ’08: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This front bumper grille is associated with Hyundai Sonata ’04 / Sonata ’08. The numbers 86561-3K500 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The maintenance supervisor should mark upper edge alignment below the lamps, measure overall corner curvature, and inspect side-retainer engagement before the replacement is test-positioned. This route applies to the front bumper grille shown for Hyundai Sonata ’04 / Sonata ’08.

If images accompany the enquiry, include a connector close-up, an underside image, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with connector close-up to mark upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from underside image. Before the replacement is test-positioned, measure side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’04 / Sonata ’08 vehicle record.

A workshop estimator should mark bracket and bolt-hole spacing from a corner-profile view, then mark upper edge alignment below the lamps before the vehicle is dismantled. The installation team should mark side-retainer engagement from a lower-retainer view, then note overall corner curvature before the packing plan is prepared. The parts coordinator should compare overall corner curvature from a chassis-plate image, then inspect overall corner curvature before the fitment decision is signed off. The parts coordinator should document upper edge alignment below the lamps from an installation-opening picture, then review bracket and bolt-hole spacing before the stock request is released.

Ordering Information

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Procurement Checklist

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

How should the model application be interpreted?

This front bumper grille is listed for Hyundai Sonata ’04 / Sonata ’08. Use that designation as a starting point and verify the vehicle configuration before ordering.

How is the pictured version best verified?

The practical checks are upper edge alignment below the lamps, bracket and bolt-hole spacing and the surrounding clearance. Avoid choosing the item from the model name alone.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Add vehicle details so availability and packing can be checked against the requested version.