86522-0X200 Grille Front Bumper for Hyundai I10 ’11 / I10 ‘2014

Grille Front Bumper for Hyundai I10 ’11 / I10 ‘2014: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Physical Fitment Points

This grille front bumper is associated with Hyundai I10 ’11 / I10 ‘2014. Record 86522-0X200 and compare it with the old part before asking for availability. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should cross-check bracket and bolt-hole spacing, compare lamp or grille openings, and verify overall corner curvature before the fitment decision is signed off. This route applies to the grille front bumper shown for Hyundai I10 ’11 / I10 ‘2014.

If images accompany the enquiry, include a fixing-point close-up, a vehicle-side photograph, and an underside image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with fixing-point close-up to cross-check bracket and bolt-hole spacing. A second image should show side-retainer engagement from vehicle-side photograph. Before the fitment decision is signed off, compare overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai I10 ’11 / I10 ‘2014 vehicle record.

A collision-repair specialist should confirm side-retainer engagement from a connector close-up, then record bracket and bolt-hole spacing before the installation begins. A vehicle inspector should align bracket and bolt-hole spacing from a side-profile photograph, then review lamp or grille openings before the commercial request is submitted. The procurement contact should capture bracket and bolt-hole spacing from a connector close-up, then mark side-retainer engagement before the purchase order is issued. The repair planner should verify lamp or grille openings from a connector close-up, then record side-retainer engagement before the shipment is booked.

Vehicle-Side Evidence

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. Recorded packing is 100 × 40 × 27CM / 20PCS; reconfirm current packing when freight is quoted.

Inspection Route

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What model is associated with this replacement part?

This grille front bumper is listed for Hyundai I10 ’11 / I10 ‘2014. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Compare bracket and bolt-hole spacing, side-retainer engagement and the required installation position with the removed component. VIN or chassis details add another useful check.

Which details help prepare shipping terms?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Add vehicle details so availability and packing can be checked against the requested version.