86515-4H700 / 86516-4H700 Front Bumper Bracket for Hyundai Starex ’18 / H1 / Tucson

Front Bumper Bracket for Hyundai Starex ’18 / H1 / Tucson: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Supply Enquiry Details

This front bumper bracket is associated with Hyundai Starex ’18 / H1 / Tucson. Write 86515-4H700 / 86516-4H700 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Repair Planning Notes

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The stock controller should document lamp or grille openings, assess side-retainer engagement, and document bracket and bolt-hole spacing before the commercial request is submitted. This route applies to the front bumper bracket shown for Hyundai Starex ’18 / H1 / Tucson.

If images accompany the enquiry, include a connector close-up, a connector close-up, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with connector close-up to document lamp or grille openings. A second image should show upper edge alignment below the lamps from connector close-up. Before the commercial request is submitted, assess bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Starex ’18 / H1 / Tucson vehicle record.

The service adviser should record bracket and bolt-hole spacing from an upper-edge image, then verify overall corner curvature before the replacement is test-positioned. A collision-repair specialist should photograph bracket and bolt-hole spacing from a removed-part overview, then inspect bracket and bolt-hole spacing before the installation begins. The importing distributor should document upper edge alignment below the lamps from an original-label photograph, then mark bracket and bolt-hole spacing before the stock request is released. A vehicle inspector should align lamp or grille openings from a chassis-plate image, then evaluate lamp or grille openings before the stock request is released.

Technical Comparison Notes

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What vehicle information should be checked first?

The stated vehicle is Hyundai Starex ’18 / H1 / Tucson. Treat that model label as one part of the fitment check, together with photographs and chassis details.

How is the pictured version best verified?

Ask the workshop to inspect lamp or grille openings together with upper edge alignment below the lamps. VIN or chassis information can clarify market-specific differences.

What should a distributor send for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.