86512-0X000 Front Bumper for Hyundai I10 ’07 / I10 ’11

Front Bumper for Hyundai I10 ’07 / I10 ’11: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Inspection Route

This front bumper is associated with Hyundai I10 ’07 / I10 ’11. Reference matching begins with 86512-0X000; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

A collision-repair specialist should mark overall corner curvature, align bracket and bolt-hole spacing, and trace upper edge alignment below the lamps before the packing plan is prepared. This route applies to the front bumper shown for Hyundai I10 ’07 / I10 ’11.

If images accompany the enquiry, include an adjacent-panel image, a vehicle-side photograph, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with adjacent-panel image to mark overall corner curvature. A second image should show lamp or grille openings from vehicle-side photograph. Before the packing plan is prepared, align upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai I10 ’07 / I10 ’11 vehicle record.

The parts coordinator should capture upper edge alignment below the lamps from a vehicle-side photograph, then mark bracket and bolt-hole spacing before the repair schedule is finalized. A workshop estimator should assess overall corner curvature from a rear mounting view, then measure bracket and bolt-hole spacing before the shipment is booked. The stock controller should assess lamp or grille openings from a lower-retainer view, then document overall corner curvature before the fitment decision is signed off. The installation team should assess side-retainer engagement from a connector close-up, then document side-retainer engagement before the stock request is released.

Purchase Preparation

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Repair Planning Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What is the listed vehicle application?

The recorded application is Hyundai I10 ’07 / I10 ’11. Confirm trim, market specification and the removed front bumper before purchase.

Which details help confirm the correct version?

Photograph overall corner curvature and the mounting area around lamp or grille openings. Combine those images with vehicle identification data for review.

Which details help prepare shipping terms?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.