86511-F2000 Front Bumper for Hyundai Elantra ’16

Front Bumper for Hyundai Elantra ’16: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Physical Fitment Points

This front bumper is associated with Hyundai Elantra ’16. If 86511-F2000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The procurement contact should inspect overall corner curvature, review bracket and bolt-hole spacing, and align upper edge alignment below the lamps before the carton is allocated. This route applies to the front bumper shown for Hyundai Elantra ’16.

If images accompany the enquiry, include an adjacent-panel image, an underside image, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with adjacent-panel image to inspect overall corner curvature. A second image should show lamp or grille openings from underside image. Before the carton is allocated, review upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’16 vehicle record.

The maintenance supervisor should note side-retainer engagement from a fixing-point close-up, then trace bracket and bolt-hole spacing before the repair schedule is finalized. A vehicle inspector should compare lamp or grille openings from a connector close-up, then evaluate overall corner curvature before the carton is allocated. A collision-repair specialist should photograph bracket and bolt-hole spacing from an upper-edge image, then confirm overall corner curvature before the carton is allocated. The importing distributor should inspect overall corner curvature from a straight-on view, then measure upper edge alignment below the lamps before the packing plan is prepared.

Supply Enquiry Details

Transfer reusable hardware only after checking that every retainer matches the replacement openings. Recorded packing is 228 × 30 × 47CM / 5PCS; reconfirm current packing when freight is quoted.

Part Recognition Guide

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which Hyundai model does this page cover?

The listing covers Hyundai Elantra ’16. Because configurations may vary, check the actual installation area before approving the front bumper.

How should fitment be checked before ordering?

Compare overall corner curvature, lamp or grille openings and the required installation position with the removed component. VIN or chassis details add another useful check.

What should a distributor send for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Keep each requested product on a separate line when several parts share one shipment.