86511-A5000 Front Bumper for Hyundai I30 ’12 / Ix25 / Creta

Front Bumper for Hyundai I30 ’12 / Ix25 / Creta: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Ordering Information

This front bumper is associated with Hyundai I30 ’12 / Ix25 / Creta. Reference matching begins with 86511-A5000; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The receiving technician should compare lamp or grille openings, mark side-retainer engagement, and inspect bracket and bolt-hole spacing before the installation begins. This route applies to the front bumper shown for Hyundai I30 ’12 / Ix25 / Creta.

If images accompany the enquiry, include a removed-part overview, a removed-part overview, and an underside image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with removed-part overview to compare lamp or grille openings. A second image should show upper edge alignment below the lamps from removed-part overview. Before the installation begins, mark bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai I30 ’12 / Ix25 / Creta vehicle record.

The procurement contact should inspect upper edge alignment below the lamps from a full component outline, then verify side-retainer engagement before the repair schedule is finalized. The stock controller should verify upper edge alignment below the lamps from a full component outline, then review upper edge alignment below the lamps before the purchase order is issued. The installation team should capture side-retainer engagement from a corner-profile view, then trace upper edge alignment below the lamps before the replacement is test-positioned. The parts coordinator should mark overall corner curvature from an upper-edge image, then compare side-retainer engagement before the delivery plan is confirmed.

Supply Enquiry Details

Arrange a dry comparison before final fastening, and stop if holes or clips need force to line up. No packing entry is published here; request current carton and quantity information with the quotation.

Inspection Route

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This page associates the front bumper with Hyundai I30 ’12 / Ix25 / Creta. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

The practical checks are lamp or grille openings, upper edge alignment below the lamps and the surrounding clearance. Avoid choosing the item from the model name alone.

How can a trade buyer request pricing?

Send the order volume and destination together with VIN or chassis information where available. Keep each requested product on a separate line when several parts share one shipment.