86511-3X000 Front Bumper for Hyundai Elantra ’11 / Elantra ’14

Front Bumper for Hyundai Elantra ’11 / Elantra ’14: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Reference Check

This front bumper is associated with Hyundai Elantra ’11 / Elantra ’14. Use 86511-3X000 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The installation team should mark upper edge alignment below the lamps, record overall corner curvature, and evaluate side-retainer engagement before the fitment decision is signed off. This route applies to the front bumper shown for Hyundai Elantra ’11 / Elantra ’14.

If images accompany the enquiry, include a rear mounting view, a removed-part overview, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with rear mounting view to mark upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from removed-part overview. Before the fitment decision is signed off, record side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’11 / Elantra ’14 vehicle record.

The maintenance supervisor should note bracket and bolt-hole spacing from a corner-profile view, then photograph side-retainer engagement before the repair schedule is finalized. The repair planner should confirm upper edge alignment below the lamps from a corner-profile view, then photograph bracket and bolt-hole spacing before the delivery plan is confirmed. The procurement contact should capture upper edge alignment below the lamps from a straight-on view, then photograph bracket and bolt-hole spacing before the carton is allocated. The maintenance supervisor should record bracket and bolt-hole spacing from an original-label photograph, then measure overall corner curvature before the delivery plan is confirmed.

Installation Planning

Place old and replacement components side by side, then review every fixing point before installation. Recorded packing is 195 × 35 × 30CM / 5PCS; reconfirm current packing when freight is quoted.

Ordering Information

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which Hyundai model does this page cover?

This front bumper is listed for Hyundai Elantra ’11 / Elantra ’14. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Ask the workshop to inspect upper edge alignment below the lamps together with bracket and bolt-hole spacing. VIN or chassis information can clarify market-specific differences.

How can a trade buyer request pricing?

Send the order volume and destination together with VIN or chassis information where available. Include clear original-part photographs when the exact configuration needs further review.