86366-0X000 / 86512-0X000 Front Bumper Frame for Hyundai I10 ’07 / I10 ’11

Front Bumper Frame for Hyundai I10 ’07 / I10 ’11: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This front bumper frame is associated with Hyundai I10 ’07 / I10 ’11. Cross-check 86366-0X000 / 86512-0X000 against the removed item, paying attention to every prefix, suffix and character. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Inspection Route

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The procurement contact should verify bracket and bolt-hole spacing, inspect lamp or grille openings, and document overall corner curvature before the carton is allocated. This route applies to the front bumper frame shown for Hyundai I10 ’07 / I10 ’11.

If images accompany the enquiry, include a fixing-point close-up, a fixing-point close-up, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with fixing-point close-up to verify bracket and bolt-hole spacing. A second image should show side-retainer engagement from fixing-point close-up. Before the carton is allocated, inspect overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai I10 ’07 / I10 ’11 vehicle record.

The importing distributor should inspect side-retainer engagement from an installation-opening picture, then verify lamp or grille openings before the packing plan is prepared. A workshop estimator should evaluate lamp or grille openings from an installation-opening picture, then review lamp or grille openings before the shipment is booked. The procurement contact should photograph overall corner curvature from a rear mounting view, then compare lamp or grille openings before the shipment is booked. The installation team should note lamp or grille openings from a corner-profile view, then inspect overall corner curvature before the installation begins.

Component Matching Record

Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. Recorded packing is 166 × 50 × 63CM / 5PCS; reconfirm current packing when freight is quoted.

Repair Planning Notes

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which vehicle record belongs with this product?

This front bumper frame is listed for Hyundai I10 ’07 / I10 ’11. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Check bracket and bolt-hole spacing, confirm side-retainer engagement, and retain the removed part until the replacement has been compared side by side.

How should a wholesale request be submitted?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. State the required side or installation position where that detail applies.