86360-S1500 Front Bumper Strip for Hyundai Santa Fe ’21

Front Bumper Strip for Hyundai Santa Fe ’21: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Workshop Comparison

This front bumper strip is associated with Hyundai Santa Fe ’21. If 86360-S1500 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle Confirmation

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The service adviser should compare bracket and bolt-hole spacing, assess lamp or grille openings, and note overall corner curvature before the commercial request is submitted. This route applies to the front bumper strip shown for Hyundai Santa Fe ’21.

If images accompany the enquiry, include a chassis-plate image, an original-label photograph, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with chassis-plate image to compare bracket and bolt-hole spacing. A second image should show side-retainer engagement from original-label photograph. Before the commercial request is submitted, assess overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe ’21 vehicle record.

A workshop estimator should measure upper edge alignment below the lamps from a chassis-plate image, then photograph upper edge alignment below the lamps before the fitment decision is signed off. The repair planner should confirm upper edge alignment below the lamps from a rear mounting view, then record bracket and bolt-hole spacing before the packing plan is prepared. The stock controller should cross-check lamp or grille openings from a fastener detail, then align side-retainer engagement before the packing plan is prepared. The stock controller should review lamp or grille openings from a connector close-up, then verify bracket and bolt-hole spacing before the replacement is test-positioned.

Purchase Preparation

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Supply Enquiry Details

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What vehicle information should be checked first?

The stated vehicle is Hyundai Santa Fe ’21. Treat that model label as one part of the fitment check, together with photographs and chassis details.

Which details help confirm the correct version?

Compare bracket and bolt-hole spacing, side-retainer engagement and the required installation position with the removed component. VIN or chassis details add another useful check.

What information is needed for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Include clear original-part photographs when the exact configuration needs further review.